Transition-networks Standalone Media convertor MGE-PSW-SX-01 User Manual download pdf (Page 7)

M/GE-PSW-xX-01

Tech Support: 1-800-260-1312 International: 00-1-952-941-7600 (24 hours)

Technical Specifications

For use with Transition Networks Model M/GE-PSW-xX-01 converters.

Standards: IEEE 802.3-2000

Data rate: 10 Mb/s, 100 Mb/s, 1000 Mb/s

Dimensions: 1.8"W x 3.35"D x 0.85"H (45.7 x 85.1 x 21.6 mm)

Weight: 3.15 oz. (127.5 g) approximately

MTBF*: 24,466 hours (MIL217F2 V5.0) (MIL-HDBD-217F)

100,130 hours (Bellcore7 V5.0)

Memory: 1Meg

MAC addresses: 8K

Maximum packet size: 1632 bytes, untagged

1628 bytes, tagged

Power sources: Unit will accept - 5 to 28 VDC

Barrel connector – Wall Mount AC Adapter

(400mA at 12VDC)(The external power supply provided

with this product is UL listed by the power supply’s

manufacturer.)

Power consumption: 262mA @ 12VDC, 3.15 watts

Environment: Tmra**: 0°C to 50°C (32°F to 122°F )

Storage Temp: -25°C to 65°C (-13°F to 149°F)

Humidity: 5% to 95%, non-condensing

Altitude: 0 to 10,000 feet

Warranty: Lifetime

*MTBF is estimated using the predictability method. This method is based on MIL-

217F at 25°C ambient temperature, typical enclosure heat rise of 10°C with nominal

operating conditions and parameters. Installation and configuration specific MTBF

estimates are available upon request. Contact Technical Support.

**Manufacturer’s rated ambient temperature.

CAUTION:

Copper based media ports, e.g., Twisted Pair (TP) Ethernet, USB, RS232,

RS422, RS485, DS1, DS3, Video Coax, etc., are intended to be connected to intra-

building (inside plant) link segments that are not subject to lightening transients or

power faults. Copper-based media ports, e.g., Twisted Pair (TP) Ethernet, USB,

RS232, RS422, RS485, DS1, DS3, Video Coax, etc., are NOT to be connected to inter-

building (outside plant) link segments that are subject to lightening transients or power

faults. Failure to observe this caution could result in damage to equipment.

[email protected] -- Click the “Transition Now” link for a live Web chat.

Troubleshooting

If the media converter fails, isolate and correct the failure by determining the answers

to the following questions and then taking the indicated action:

1. Is the power LED illuminated and did the TX and FX LEDs turn ON then turn

OFF?

Is the power adapter the proper type of voltage and cycle frequency for

the AC outlet?

• Is the power adapter properly installed in the media converter and in the

outlet?

• Contact Technical Support: US/Canada: 1-800-260-1312, International:

00-1-952-941-7600.

YES

• Proceed to step 2.

Note the following:

• As a link pass-through device both copper and fiber cables must be

installed before the LEDs will light.

2. Are the “TX and FX-Link/ACT” LEDs illuminated on the RJ-45 port ?

• Check the copper cables for proper connection.

• Check the fiber cables for proper connection.

• Contact Technical Support: US/Canada: 1-800-260-1312, International:

00-1-952-941-7600.

YES

• Contact Technical Support: US/Canada: 1-800-260-1312, International:

00-1-952-941-7600.

Technical Specifications—Continued

Copper-based media ports, e.g., Twisted Pair (TP) Ethernet, USB, RS232, RS422,

RS485, DS1, DS3, Video Coax, etc., are intended to be connected to intra-building

(inside plant) link segments that are not subject to lightening transients or power

faults. Copper based media ports, e.g., Twisted Pair (TP) Ethernet, USB, RS232,

RS422, RS485, DS1, DS3, Video Coax, etc., are NOT to be connected to inter-

building (outside plant) link segments that are subject to lightening transients or power

faults.

The product is certified by the manufacturer to comply with DHHS Rule 21/CFR,

Subchapter J applicable at the date of manufacture.

WARNING:

Visible and invisible laser radiation when open. Do not stare into the

beam or view directly with optical instruments. Failure to observe this warning could

result in an eye injury or blindness.

WARNING:

Use of controls, adjustments, or the performance of procedures other

than those specified herein could result in hazardous radiation exposure.

The information in this user’s guide is subject to change. For the most up-to-date

information, view the user’s guide on-line at: www.transition.com.

1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments

Transition-networks Standalone Media convertor MGE-PSW-SX-01 User Manual Page 7

Comments to this Manuals